|
|
||
|
|
||
|
|
Metal Marushin COLT S.A.A. .45 With Real Wood Grips 5 1/2in Barrel
Metal Marushin : COLT S.A.A. .45 (Artillery) In very good condition / appears unused / unfired ALL Metal with Real Wood Grips Weight: 1.1 Kilogram Barrel Length: 5 1/2" Includes: Original box, original instructions, six .45 cartridges and 1 box of M.G caps for 100 shots. Any questions: info@modelguns-worldwide.com International: We ship to the U.S. and Europe. Delivery times 3 - 7 days with full online tracking of your order. Please ask for a shipping quote Colt S.A.A. .45 Real Look Dummy bullets Real look Colt .45 bullets with correct marking, great for display with your S.A.A. .45 : Six cartridges : £22.95
Brief info on COLT SAA Revolvers Colt SAA revolvers have been produced as Single Action Army and Buntline models . . . standard models have a round top frame . . . barrel lengths are 4 3/4, 5 1/2, and 7 1/2 inches. The Buntline model came with a 12 inch barrel but was otherwise similar to the regular SAA. The SAA uses a hammer mounted firing pin, and a loading gate in the left side of the frame gives access for loading and unloading. The steel ejector rod housing is located on the lower right side of the barrel, aligned with the loading gate. The fluted cylinder is easily removed for cleaning . . . and can be removed from the right side of the frame. To eject fired cases from a Colt single action revolver, the hammer is put in its half-cock position . . . the cylinder is manually rotated . . . so that a stroke of the spring loaded ejector rod can knock out the case. Loading is likewise accomplished one chamber at a time
|
