|
|
||
|
|
||
|
|
Metal Marushin: COLT S.A.A. .45 Cavalry With Real Wood Grips 7 1/2" Barrel
In very good condition, appears unused, unfired. ALL Metal with Real Wood Grips Weight Approx: 1.2 Kilogram Barrel Length: 7 1/2" Vents from chamber Operates, strips down like a real S.A.A. .45 Includes: Original box, 6 unused Marushin Colt .45 cartridges, real wood grips, and 1 box of M.G caps for 100 shots. Any questions: info@modelguns-worldwide.com Stag Horn style grips: €50.75 / £34.95
Colt S.A.A. .45 Real Look Dummy bullets Real look Colt .45 bullets with correct marking, great for display with your S.A.A. .45 : Six cartridges : €33.25 / £22.95
Brief info on COLT S.A.A. .45 Revolvers Colt SAA revolvers have been produced as Single Action Army and Buntline models . . . standard models have a round top frame . . . barrel lengths are 4 3/4, 5 1/2, and 7 1/2 inches. The Buntline model came with a 12 inch barrel but was otherwise similar to the regular SAA. The SAA uses a hammer mounted firing pin, and a loading gate in the left side of the frame gives access for loading and unloading. The steel ejector rod housing is located on the lower right side of the barrel, aligned with the loading gate. The fluted cylinder is easily removed for cleaning . . . and can be removed from the right side of the frame. To eject fired cases from a Colt single action revolver, the hammer is put in its half-cock position . . . the cylinder is manually rotated . . . so that a stroke of the spring loaded ejector rod can knock out the case. Loading is likewise accomplished one chamber at a time
|
